Refurbished Hill-Rom Versacare P3200 hospital bed

Regular price $3,700.00 USD Sale price $3,700.00 USD
In stock
Description

Refurbished Hill-Rom Versacare P3200 hospital bed

Refurbishig Process For Hospital Bed:

  • Disassemble and disinfect all components
  • Inspect all working components for wear and replace defective parts as necessary
  • Polish, replate, repaint, or replace all exterior components
  • Check  safety switches, lockout switches, foot pedals  replace if necessary
  • Inspect, clean, and lubricate head, knee
  • Recalibrate brake and steer system
  • Inspect and lubricate all pivot points, Siderail latches, instant CPR cables
  • Battery backup replacement
  • Mattress leaking test
  • Hydraulic leaking test
  • Electric motor test
  • Scale calibration
  • siderails cables replacement
  • Air Mattress 24 hours test 
Description

COMPREHENSIVE SAFETY-PROMOTING MEASURES The VersaCare bed is designed to be able to adjust height, including low positions, to help make it easy for patients to get in and out of bed. Its LowChair ® position allows a patient to sit upright while keeping the bed close to the floor. SafeView ® Alerts offer caregivers a visual indication of the safety condition of the bed, including the status of siderails, brakes, HOB and bed height. If your patient’s head-of-bed is lowered below 30 degrees, the Head-ofBed alarm alerts you of the need to respond. The 3-Level Bed Exit Alarm with advanced sensitivity detects whether the patient is lying in bed, sitting on the edge of bed, or is out of bed.

Patient Weight Limit:
  • Patient weight, all surfaces: 500 lbs (227 kg)
  • Safe working load, including all accessories: 550 lbs (250 kg)
Patient Controls:
  • Siderail patient bed controls: Standard
  • Docking pendant: Optional
STANDARD FEATURES
  • Scale System
  • Side Patient Bed Controls
  • SafeView® Alerts*
  • Bed Exit Alarm System
TECHNICAL SPECIFICATIONS

Bed:

  • Low Position - Floor to Center of Deck: 13" (33 cm)
  • Low Position - Floor to Edge of Deck: 17" (43.2 cm)
  • High Position - Floor to Center of Deck: 30" (76.2 cm)
  • High Position - Floor to Edge of Deck: 34" (86.4 cm)
  • Maintains low height when placed in chair: Yes
  • Headboard/push handles maintain same height regardless of patient surface height: Yes.

Sleep Surfaces:

  • Width: 35.5" (90.2 cm)
  • Length - fully extended: 86" (218 cm)
  • Length - fully retracted: 75" (191 cm)
  • Radiolucent Sleep Deck: No
  • Surface Weight Limit: 500 Lbs

Overall Width:

  • Siderails Stowed: 37" (94.0 cm)
  • Siderails Up: 40" (102.0 cm)

Overall Length:

  • Fully Extended: 94.5" (240.0 cm)
  • Fully Retracted: 82.5" (210.0 cm)

Bed Angles:

  • Head Section: 0ºto 65º
  • Knee Section: 0º to 16º
  • Foot Section: 0° to -27°
  • Max Trend/Reverse Trend: 15° / 10°
  • Head and Trend Angle Indicators: Yes

Caster & Braking System:

  • Caster Diameter: 5" (12.7 cm)
  • with IntelliDrive® power transport: 6" (15.2 cm)
  • Optional IntelliDrive® power transport: Yes
  • Four Wheel Braking: Yes
  • Brakes Lock Both Rolling and Swiveling: Yes

Optional Light Alerts

Feature indicators: Low low bed/chair, siderails down, brake not set, bed exit not armed

Optional Bed Exit Alarm System:

  • Sensitivity levels: 3
  • Modes: Positioning, Exiting, Out-of-Bed, Alarm Silence

Optional Scale System

  • Accuracy: 1% of patient weight
  • Weigh in any position (except Trend/Rev Trend): Yes
  • Scale weight capacity 500 lbs (227 kg)

Electrical Characteristics:

Backup Battery Power: Standard

Caster and Braking System

  • Optional IntelliDrive® power transport Yes
  • Caster diameter 5" (12.7 cm)
  • with IntelliDrive® power transport 6" (15.2 cm)
  • Four-wheel braking Yes
  • Brakes lock both rolling and swiveling Yes

BOOST ® ONE-BUTTON FEATURE Helps patients move toward the head of the bed

POINT-OF-CARE ® CONTROL PANEL Uses easy to-read digital displays and simple icons

FULLY-FEATURED LOW BED Adjusted to the optimal height for patient care with full functionality in the lowest position

HANDSFREE ® FOOT PEDAL SYSTEM Allows caregivers to raise and lower the head of the bed and the height of the bed without using their hands

LOWCHAIR ® POSITION Allows your patient to be placed in an upright sitting position while keeping the bed low

FLEXAFOOT™ RETRACTABLE FOOT MECHANISM Allows the caregiver to customize the length of the bed up to 11"


Our core values

Tilt angle (up/down): +90° ~ -35°

Tilt angle (up/down): +90° ~ -35°

miami_export_logo.png

Tilt angle (up/down): +90° ~ -35°

Tilt angle (up/down): +90° ~ -35°

Tilt angle (up/down): +90° ~ -35°

Detailed specification

Flexible height adjustment column mechanism

Arm uses a 40 cm tall column with two arms secured by a locking pin. When the arms need to be adjusted up or down, users can easily loosen and tighten the pin.Thanks to this mechanism, the screen can be set up in a variety of configurations, from tilting to being positioned close to the wall, with a maximum height of up to 66 cm from the surface of the desk.

Easy vertical dual-screen setup

With the column-style monitor arm, you can easily adjust the two arms in upper and lower positions, making it ideal for setups used by designers, architects, artists, and more.The P1 Dual supports two monitors, each ranging from 22 to 34 inches.In the image, two 27-inch monitors are being used.

Durable and Smooth Hyper Lift Piston Assist

The P1 Dual features a strong Hyper Lift piston, ensuring smooth adjustments for raising, lowering, tilting, or rotating your monitors. Built for durability, it provides effortless control even with heavier screens.Perfect for designers, architects, and artists, the Hyper Lift allows quick repositioning and flexible setups. Adjust angles easily for a more efficient and comfortable workspace.

Quick and Easy Detachable VESA Mount

The P1 Dual includes a detachable VESA mount, ensuring both safety and sturdiness while allowing for fast, hassle-free installation or removal.This added feature makes it easier for users to set up or adjust their monitors, offering both security and convenience in one simple accessory.

Our core values

Monitor Arm

01 x Human Motion Single Monitor Arm

Installation Accessories

01 set of tools and accessories for installation

User Manual

User instruction manual

What's

Customer Success is Our Success

Common Questions

How to Choose your Monitor Arm: Key Tips to Consider

Before purchasing an Arm, make sure you have a few key details in mind. You'll need to know your monitor's specifications (weight, VESA compatibility, and the Arm's load capacity)

VESA Compatibility: Check for 75x75mm or 100x100mm mounting holes.

You can easily check your monitor's compatibility by measuring the distance between the holes on the back of the monitor. If the distance is 75mm x 75mm or 100mm x 100mm, then your monitor is compatible with most VESA-compatible monitor arms.

Monitor arms typically list the weight capacity they can support. It's important to check your monitor's weight and choose a monitor arm that can support that weight comfortably. Most arms support between 4 to 10 kg, but heavier monitors may require a specialized arm.

Yes, there are monitor arms specifically designed for dual monitors. Ensure that the arm is rated for the combined weight of both monitors, and that it has the required mounting configurations.

Monitor arms typically offer a wide range of motion, including tilt (up to 40°), swivel (up to 360°), and height adjustment (sometimes up to 15 inches). Ensure you choose one with enough flexibility to meet your ergonomic needs.

What's new

Newsletter

The gift of catching up. Bring it all together: family, friends and your favourite artists. With Beoplay A1, you'll never miss a beat – or a word.